Reflection attack

A reflection attack is a method of attacking a challenge-response authentication system that uses the same protocol in both directions. That is, the same challenge-response protocol is used by each side to authenticate the other side. The essential idea of the attack is to trick the target into providing the answer to its own challenge.^[1]

Attack

The general attack outline is as follows:

1. The attacker initiates a connection to a target.
2. The target attempts to authenticate the attacker by sending it a challenge.
3. The attacker opens another connection to the target, and sends the target this challenge as its own.
4. The target responds to the challenge.
5. The attacker sends that response back to the target on the original connection.

If the authentication protocol is not carefully designed, the target will accept that response as valid, thereby leaving the attacker with one fully authenticated channel connection (the other one is simply abandoned).

Solution

Some of the most common solutions to this attack are described below:

• The responder sends its identifier within the response so, if it receives a response that has its identifier in it, it can reject it.^[2]

1. Alice initiates a connection to Bob
2. Bob challenges Alice by sending a nonce. B -> A: N
3. Alice responds by sending back her identifier and the nonce encrypted using the shared key K_ab. A -> B: {A, N}K_ab
4. Bob decrypts the message, makes sure its from Alice and not a message he had sent in the past by finding A in it and not B and if the nonce is the same as the one he sent in his challenge then he accepts the message.

• Require the initiating party to first respond to challenges before the target party responds to its challenges.
• Require the key or protocol to be different between the two directions.

See also

• Replay attack
• Man-in-the-middle attack

References